Working on breaking in the barrel on Bula XM21 #209 that I just put together recently. Took the scope off and removed the action for more clearance work in the ferule area. This is a USGI figerglass stock so we can't expect much accuracy. Not bedded yet but pretty tight at any rate.
Target 1 is cold clean bore after sticking the scope back on. 1.5 moa to the right with elevation pretty good. 2 is second 10 rnd group with a bit of over correction. Targets 3 and 4 are reversed. 4 shot first then moved into 3 as adjustments to scope were being made. 5 is the final 10 rnd group of the 50 rnds fired today. Whatta Hobby!
10 29 1.jpg10 29 2.jpg10 29 4.jpg10 29 3.jpg10 29 5.jpg
Target 1 is cold clean bore after sticking the scope back on. 1.5 moa to the right with elevation pretty good. 2 is second 10 rnd group with a bit of over correction. Targets 3 and 4 are reversed. 4 shot first then moved into 3 as adjustments to scope were being made. 5 is the final 10 rnd group of the 50 rnds fired today. Whatta Hobby!
10 29 1.jpg10 29 2.jpg10 29 4.jpg10 29 3.jpg10 29 5.jpg

Comment