Thanks for the additional photos.
The receiver ring has been ground down, probably by a private individual or gunsmith and only traces of the original markings remain. While they were grinding it down, they rounded the front edge of the receiver ring. Someone then hand re-stamped the markings and serial number. This work did NOT originate from Springfield Armory. I can confirm that the serial number is the original serial number.
I speculate that the receiver ring was once drilled and tapped for a telescope. Someone then welded up the holes, then ground down the ring and re-stamped it. There's a very good chance that the receiver ring has been annealed (softened) and is no longer safe for shooting. That would explain how they were able to re-stamp it, since the receiver ring was no longer hardened.
Hope this helps. Thanks again for the additional photos!
J.B.
The receiver ring has been ground down, probably by a private individual or gunsmith and only traces of the original markings remain. While they were grinding it down, they rounded the front edge of the receiver ring. Someone then hand re-stamped the markings and serial number. This work did NOT originate from Springfield Armory. I can confirm that the serial number is the original serial number.
I speculate that the receiver ring was once drilled and tapped for a telescope. Someone then welded up the holes, then ground down the ring and re-stamped it. There's a very good chance that the receiver ring has been annealed (softened) and is no longer safe for shooting. That would explain how they were able to re-stamp it, since the receiver ring was no longer hardened.
Hope this helps. Thanks again for the additional photos!
J.B.

Comment